9X7323 8C9146 3J4460 3G2646 8C9136 9X7333 1080134 3J7761 1080132 6E0036 1525064 9X7329 1086214 623943 9X7354 9X7353 9X73

Cleanliness of the Engine
It is important to maintain extreme cleanliness when working on the fuel system, since even tiny particles can cause engine or fuel system problems.
1.The entire engine should be washed with a high-pressure water system. Washing the engine will remove dirt and loose debris before a repair on the fuel system is started. Ensure that no high-pressure water is directed at the seals for the injectors or any electrical connector.Environment
When possible, the service area should be positively pressurized. Ensure that the components are not exposed to contamination from airborne dirt and debris. When a component is removed from the system, the exposed fuel connections must be closed off immediately with suitable sealing plugs. The sealing plugs should only be removed when the component is reconnected.

2.The sealing plugs must not be reused. Dispose of the sealing plugs immediately after use. Contact your nearest dealer in order to obtain the correct sealing plugs.New Components
3.High-pressure lines are not reusable. New high-pressure lines are manufactured for installation in one position only. When a high-pressure line is replaced, do not bend or distort the new line. Internal damage to the pipe may cause metallic particles to be introduced to the fuel.All new fuel filters, high-pressure lines, tube assemblies, and components are supplied with sealing plugs. These sealing plugs should only be removed in order to install the new part. If the new component is not supplied with sealing plugs then the component should not be used.The technician must wear suitable rubber gloves.

4.The rubber gloves should be disposed of immediately after completion of the repair in order to prevent contamination of the system.Refueling
In order to refuel the diesel fuel tank, the refueling pump and the fuel tank cap assembly must be clean and free from dirt and debris. Refueling should take place only when the ambient conditions are free from dust, wind, and rain.Only use fuel that is free from contamination. Ultra Low Sulfur Diesel (ULSD) must be used. The content of sulfur in Ultra Low Sulfur Diesel (ULSD) fuel must be below 15 PPM 0.0015%.Biodiesel may be used. The neat biodiesel must conform to the latest "EN14214 or ASTM D6751" (in the USA). The biodiesel can only be blended in mixture of up to 20% by volume in acceptable mineral diesel fuel meeting latest edition of "EN590 or ASTM D975 S15" designation.In United States, Biodiesel blends of B6 to B20 must meet the requirements listed in the latest edition of "ASTM D7467" (B6 to B20) and must be of an API gravity of 30-45.

5.For more information, refer to Operation and Maintenance Manual, "Fluid Recommendations".

  Guangzhou JRS Machinery Equipment Co.,Ltd since its inception in 2004, has been engaged in hydraulic seals business of excavators, loaders, bulldozers,breaking hammers and other seals have in-depth study. Through more than 15 years of efforts, JRS has accumulated a large number of domestic, imported excavators and broken hammer seal data, and for new products and new models of seals data constantly updated, finishing and perfect. After more than 10 years of practical inspection, product quality is stable and reliable, has accumulated rich experience and good reputation, with long-term cooperation at home and abroad friends and customers, "take care of the equipment,improve the efficiency and honesty" concept won the customers at home and abroad highly recognized and widely praised
In the future, we will continue to maintain a rigorous scientific attitude, to maintain a professional, precise style of work, and strive to become the best supplier of Chinese seal repair kits, look forward to your cooperation!